Call 1-866-449-5225 to Get the Best Advice!

Accessory - 300W Monorail Low-Profile Electronic Surface Transformer by Tech Lighting

Tech Lighting - 700MOPRT30E - Accessory - 300W Monorail Low-Profile Electronic Surface Transformer

Tech Lighting 700MOPRT30E Accessory - 300W Monorail Low-Profile Electronic Surface Transformer
700MOPRT30Eby Tech Lighting
Item #: 700MOPRT30ES-400341874-A
 
  • Delivery:
    Backordered 1-2 Weeks. 
Select Your Styles and Options:
Satin Nickel Finish
Finish
 
Choose Lamping Option  (More Lamping Info)
 
Qty:
 
 
Manufacturer's Description:
DESCRIPTION
Sleek, minimalist design meets easy installation. For use when a longer drop is preferred. The Low Profile combines a sleek new design with the ability to use 4" or longer standoffs and ease of installation. First, the installer mounts and wires the upper canopy in much the same way a standard line voltage pendant would be mounted. Second, the installer snaps the lower canopy into the upper canopy without the need for any tools. The electrical connections are made automatically due to the mating components. Finally the installer attaches the rail to the single integral power feed. The transformer bay is housed completely in the bottom canopy, so should there be any problems with the transformer at any time, only the bottom canopy would need to be removed. The upper canopy can remain in place. It’s that easy. This single feed low profile surface transformer converts standard 120 line voltage to 12 volts to provide the necessary voltage for powering a Monorail low voltage lighting system. It can power lamps totaling up to 300 watts and features a fast acting secondary short circuit and overload protection that will safely turn the system off should a short occur. Once the short has been removed, the unit can be reset by simply flipping the wall switch off and on.

INSTALLATION
This product can mount to either a 4" square electrical box with round plaster ring or an octagon electrical box (not included). Rail is installed through the power feed on the canopy to bring power to the run.

OTHER
The shortest rigid standoff that can be used with this surface transformer is the 4" rigid standoff (sold separately). If dropping the rail more than 4" below the ceiling, order the desired rigid standoff length and one compatible power extender (sold separately).12 volt transformers require the use of 12 volt lamps.

 
This product is ETL Certified. More Info
 
Dimensions
Height:  2.4"
Height from Center:  4"
Width/Diameter (in):  7.5"
Lamping
Standard Wattage:  300W
Voltage Rating:  12V
Other Information
Optional Finishes:  Yes
Proposition 65 Warning
Handling products made of leaded crystal will expose you to lead,a chemical known to the State of California to cause birth defects or other reproductive harm.
 
Call us at 1-866-449-5225 or email us here (Product Questions and Quote Requests) if you find a lower price elsewhere.
 
Earn 5% off your order when you join our Special Buyer Program
 
Saved Items (0)
Recent Items (0)